Shure AuxPander Betriebsanweisung

Stöbern Sie online oder laden Sie Betriebsanweisung nach Audiomischer Shure AuxPander herunter. Shure AuxPander User guide Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 20
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
AuxPander
Auxiliary Expander
User Guide
! IMPORTANT SAFETY INSTRUCTIONS !
1. READ these instructions.
2. KEEP these instructions.
3. HEED all warnings.
4. FOLLOW all instructions.
5. DO NOT use this apparatus near water.
6. CLEAN ONLY with dry cloth.
7. DO NOT block any ventilation openings. Install in accordance with
the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat regis-
ters, stoves, or other apparatus (including amplifiers) that produce
heat.
9. DO NOT defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than the
other. A grounding type plug has two blades and a third grounding
prong. The wider blade or the third prong are provided for your safe-
ty. If the provided plug does not fit into your outlet, consult an electri-
cian for replacement of the obsolete outlet.
10. PROTECT the power cord from being walked on or pinched, particu-
larly at plugs, convenience receptacles, and the point where they exit
from the apparatus.
11. ONLY USE attachments/accessories specified by the manufacturer.
12. USE only with a cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the appa-
ratus. When a cart is used, use caution when mov-
ing the cart/apparatus combination to avoid injury
from tip-over.
13. UNPLUG this apparatus during lightning storms or when unused for
long periods of time.
14. REFER all servicing to qualified service personnel. Servicing is re-
quired when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been ex-
posed to rain or moisture, does not operate normally, or has been
dropped.
This symbol indicates that there are important operating
and maintenance instructions in the literature
accompanying this unit.
This symbol indicates that dangerous voltage constituting
a risk of electric shock is present within this unit.
WARNING: Voltages in this equipment are hazardous to life. No user-serviceable parts inside. Refer all servicing to qualified service personnel.
The safety certifications do not apply when the operating voltage is changed from the factory setting.
27A8778 (BF)
2001, Shure Incorporated
Printed in Italy
Seitenansicht 0
1 2 3 4 5 6 ... 19 20

Inhaltsverzeichnis

Seite 1 - Auxiliary Expander

AuxPander Auxiliary ExpanderUser Guide! IMPORTANT SAFETY INSTRUCTIONS ! 1. READ these instructions. 2. KEEP these instructions. 3. HEED all warnings.

Seite 2 - Additional Possibilities

10 APPENDIX I: APPLICATIONSPERSONAL AND LOUDSPEAKER MONITORINGThe greatest compromise for a vocalist or instrumentalist is having to share a mix with

Seite 3 - Basic Setup

11Hardwired PSM)SystemWireless PSM)SystemsABCABCDAB CDABCDABCD

Seite 4 - Creating Stereo Mixes

12MULTITRACK ENVIRONMENTSMultitrack RecordingModular digital multitrack recording devices (MDMs), such as digital eight-track tape recorders and hard

Seite 5 - Additional Input Capabilities

13Multitrack MonitoringUse the AuxPander IN/OUT jacks to insert it between the eight outputs of an MDM and the line inputs of another mix-ing console.

Seite 6 - Controls

14Stereo Effect SendsMost mixing consoles lack the stereo auxiliary sends necessary to accommodate the stereo inputs now common onmany effect processo

Seite 7 - BACK PANEL—INPUTS AND OUTPUTS

15INSTALLATIONSZone MixingOften, the limited number of outputs on a mixing console does not meet the high demands of installed sound systems.The AuxPa

Seite 8 - E Insert Jack

16APPENDIX II FUNDAMENTALS OF INSERT POINTS(or, how to get the most to and from your AuxPander)An insert point is a dedicated output and input to and

Seite 9 - H Direct Input Jacks

17B: The Initial Gain StageThe initial gain stage occurs right at the input connector. It lets you adjust the signal level as it enters the mixer. It

Seite 10 - APPLICATIONS

18INSERTSENDINSERTRETURNINSERTSENDINSERTRETURN“Y” cable*Two-Connector Insert PointsSIGNAL PROCESSORAuxPander IN/OUT JACKSingle-Connector Insert Points

Seite 11

19SpecificationsFrequency Response 20Hz to 20kHz, ±1dBDynamic Range 100dBMaximum Input Level 21dBuNominal Input Impedance 10kΩ (all inputs)Channel Gai

Seite 12 - MULTITRACK ENVIRONMENTS

2General DescriptionThe Shure AuxPander auxiliary expander extends the capabilities of a standard mixing console by providing eightadditional auxilia

Seite 13 - Multitrack Monitoring

20Block DiagramChannel Input 8To Level and Balance 8A–8DINPUT/OUTPUTTIP ASSIGN3211 – Local2 – Global3 – RemoteINSERTChannel Input 1123SSRRS – Tip Send

Seite 14 - Stereo Effect Sends

3Basic SetupFigure 1 illustrates the basic AuxPander setup.The AuxPander connects to the mixing console insert points. Any processors that were connec

Seite 15 - INSTALLATIONS

4Creating Stereo MixesCreate stereo mixes using the level and balance controls on the front panel of the AuxPander.On the front panel, each column cor

Seite 16 - APPENDIX II

5Additional Input CapabilitiesIn addition to receiving audio input from mixing console inserts, the AuxPander can also accept standard inputs fromline

Seite 17

6Daisy Chain Connection for MixMode MonitoringThis method sends a single line input (such as a click track or mixing console submix) to the left chan

Seite 18 - Two-Connector Insert Points

7FRONT PANEL—CONTROL KNOBSABFRONT PANEL CONTROLSFIGURE 3BACK PANEL—INPUTS AND OUTPUTSCEFGHDREAR PANEL INPUT AND OUTPUTFIGURE 4

Seite 19 - Limited One-year Warranty

8A Level Control KnobsEach LEVEL knob increases or decreases the input signal level at one of the four stereo output buses.The detented stop at the m

Seite 20 - Block Diagram

9F Insert Assign SwitchThe INSERT ASSIGN switches route processed signal returning from signal processors or other devices connected tothe AuxPander

Kommentare zu diesen Handbüchern

Keine Kommentare