Shure AMS8100 Betriebsanweisung PDF herunterladen (Seite 5)

INSTALLATION

SUPPLIED HARDWARE

 4 rubber feet

 1 rackmount bracket, long

 1 rackmount bracket, short

 2 straddle brackets

 10 bracket screws, 6 mm (1/4 in.)

 4 rackmount screws, 2.54 cm (1 in.)

 4 plastic washers

 4 wood screws, 1.25 cm (1/2 in.)

RACK MOUNTING

The SCM410 is supplied with hardware for mounting one or

two units to a 19-inch audio equipment rack. The hardware can

also be used to rack mount other Shure products, including the

SCM268, SCM262, DFR11EQ, and the DP11EQ.

Single Mixer (Half Rack) Installation

1.Attach the short and long rackmount brackets to the

SCM410/E with eight (8) of the supplied bracket screws, as

shown in Figure 4.

INSTALLING HALF–RACK MOUNTING BRACKETS

FIGURE 4

2. Place the mixer in an equipment rack and secure it with

the supplied rackmount screws and plastic washers. See

Figure 5.

RACK MOUNTING A SINGLE SCM410/E MIXER

FIGURE 5

Dual Mixer (Full Rack) Installation

1.Place the two mixers side-by-side and connect them with

two (2) straddle brackets. The brackets should straddle the

recessed edges on the top and bottom of each mixer. See

Figure 6.

INSTALLING STRADDLE BRACKETS

FIGURE 6

2.Fasten the straddle brackets using eight (8) bracket screws.

3.Attach the

short

rackmount brackets to the outsides of the

combined mixers with eight (8) of the bracket screws. See

Figure 7.

INSTALLING FULL–RACK MOUNTING BRACKETS

FIGURE 7

4. Place the mixer in an equipment rack, using the supplied

rackmount screws and plastic washers. See Figure 8.

RACK MOUNTING DUAL SCM410/E MIXERS

FIGURE 8

1 2 3 4 5 6 7 8 9 10 ... 17 18

Kommentare zu diesen Handbüchern

Keine Kommentare

Shure AMS8100 Betriebsanweisung Seite 5

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Audiomischer Shure AMS8100