Shure BLX2-K3E Betriebsanweisung PDF herunterladen (Seite 5)

PGX1

PGXD

Transmitter Controls and Connectors

Changing Batteries

Transmitter Indicator LED

Green ready

Flashing green ControlsLocked

Amber Mute On

Flashing red IR transmission in process

Glowing red Batterypowerlow

Pulsing Red on

startup

Batteriesdead(transmittercannotbeturnedonuntil

batteries are changed)

Pulsing Red after

synchronization

Transmitter and receive incompatible; contact your

Shure reseller

Wearing the Bodypack Transmitter

① IndicatorLED

Displaysbatterylevel,mute,andIR

transmission status (see table).

② Power/MuteSwitch

Press to mute or unmute. Press and hold

topoweronoroff.

③ Infrared(IR)port

Receivesinfraredbeamtosynchronize

frequencies.When using multiple

systems, only one transmitter IR port

should be exposed at a time.

④ 4-PinMicrophoneInputJack

⑤ AudioGainAdjustment

Clip the transmitter to a belt or slide a guitar strap

through the transmitter clip as shown.

For best results, slide the transmitter until the belt is

pressedagainstthebaseoftheclip.

• ExpectedlifeforanAlkalinebatteryisapproximately8

hours.

• When the transmitter light glows red, the batteries should be

changed immediately, as shown.

1 2 3 4 5 6 7 8 9 10 ... 20 21

Keine Kommentare

Shure BLX2-K3E Betriebsanweisung Seite 5