Shure BLD5760 Bedienungsanleitung PDF herunterladen

GE GE Protimeter Aquant

Sensing User Instructions

INS5760, Rev. A1

April 2007

Introduction

The GE Protimeter Aquant BLD5760 moisture detector is used to

assess and monitor the relative moisture level of non-conductive

and porous materials: such as plaster, masonry, concrete and

fiberglass (GRP). It is an ideal instrument for making rapid surveys

of solid walls and floors and to pinpoint areas of concern in tiled

shower cubicles, GRP boat hulls, motor homes and caravans etc.

The Aquant BLD5760 has a digital display that is synchronized

with a color coded LED scale. The digital display shows the relative

moisture level of the material under investigation on a scale of 0-

1000 and the LED scale indicates moisture condition of the material.

The color-coded zones signify the moisture condition of the material under investigation. The green,

yellow, and red color-coded zones indicate the following:

• Material in the green zone is in a safe air-dry condition.

• In the yellow zone moisture levels are higher than normal but not critical; further investigation is

recommended.

• The red zone represents excessive moisture levels. If sustained, red zone moisture levels will lead

to decay in organic materials.

1Operation

The Aquant BLD5760 moisture detector has a radio frequency transceiver located in the bulge on it’s

underside to give relative readings within the material against which it is held up to a nominal depth of

3/4 in. (19 mm). The depth of measurement is subject to the characteristics of the material under test.

To use the Aquant, do the following:

1. Hold the Aquant away from surfaces as shown and switch ON by pressing

momentarily. The instrument may now be used to take measurements

or zeroed as appropriate.

2. Zero the instrument (with respect to the environment in which it is about to

be used) by pressing and holding

 for 3 seconds, until the word “nuL”

appears in the display.

3. Release

; “nuL” will flash for a few seconds and then disappear from

the screen. The Aquant is now zeroed.

1 2 3 4

Inhaltsverzeichnis

Seite 1 - Sensing User Instructions

GE GE Protimeter Aquant®Sensing User InstructionsINS5760, Rev. A1April 2007IntroductionThe GE Protimeter Aquant BLD5760 moisture detector is used to a

Seite 2 - • numbers, or

Page 2 GE Protimeter Aquant4. Place the instrument against the surface of the wall, floor or element at the chosen point of measurement as shown. Ens

Seite 3 - . “04-05-20”)

GE Protimeter Aquant Page 3 2. Scroll across the display and record the following information: a. part number (“bLd5760”)b. firmware date in the form

Seite 4 - 7 Care and Maintenance

Page 4 GE Protimeter Aquant3. Press once again to select auto switch off options (2), then press  until the display shows 2 = 3.4. Press to sav

Kommentare zu diesen Handbüchern

Keine Kommentare

Shure BLD5760 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Nein Shure BLD5760 herunter. Shure BLD5760 User's Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Shure BLD5760