Shure UC Bedienungsanleitung PDF herunterladen (Seite 4)

Specification Sheet

UC WIRELESS SYSTEM

Architects’ and Engineers’ Specifications

The wireless system shall operate in the UHF band between 692 MHz and 862 MHz, with the specific range being dependent on the

user’s locale. The system shall include the option of changing the operating frequency in order to avoid RF interference, enabling up to 16

systems to operate simultaneously in the same location. Preconfigured group, channel and frequency setups shall be available to ensure

that multiple systems in use do not interfere with one another.

All transmitters shall be powered by a single 9V battery and shall have a power on/off switch, an optional mute switch, an LED indicating

that power is on, and an LED indicating low battery power. Available transmitters shall include: a body pack for use with electric guitars,

basses, and other electric instruments, as well as lavalier or headworn microphones; and a handheld microphone for vocals.

The receiver shall be a half-rack (HR) design. Mounting hardware for single or dual rack mounting shall be supplied. The system shall

use technology such as MARCAD signal combining circuitry to improve reception, minimize signal dropouts, and achieve the best possible

signal–to–noise ratio. An equalizer, tone key squelch, and noise squelch circuitry shall be built in to the system to provide optimal sound

quality and minimize unwanted noise. The receiver shall include dual RF meters, an audio level meter, and a logic in/out terminal for interfac-

ing with external devices. The receiver shall have a volume control and an adjustable noise squelch control.

The system shall be the Shure UC Wireless.

1 2 3 4

Keine Kommentare

Shure UC Bedienungsanleitung Seite 4